• SAE AMS2670J

SAE AMS2670J

  • Brazing, Copper
  • standard by SAE International, 12/28/2016
  • Category: SAE

$81.00 $41.00

This specification covers the engineering requirements for producing brazed joints using copper as the brazing filler metal.

This process has been used typically for joining carbon steels, low-alloy steels, and corrosion and heat resistant steels and alloys. It is not recommended for use on parts which will operate in service over 1000 degrees F (538 degrees C) or requiring high strength joints for service over 700 degrees F (371 degrees C), but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2636_201503

SAE J2636_201503

Corrosion Test Master Establishment..

$41.00 $81.00

SAE J2633_201503

SAE J2633_201503

Wheel and Wheel Trim Weathering Testing for Paint Coatings..

$41.00 $81.00

SAE AMS4116J

SAE AMS4116J

Aluminum Alloy, Bars, Rods, and Wire 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4) Cold Finished, Solut..

$41.00 $81.00

SAE AMS4117K

SAE AMS4117K

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si -..

$41.00 $81.00