• SAE AMS2759/2H

SAE AMS2759/2H

  • Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
  • standard by SAE International, 08/08/2018
  • Category: SAE

$81.00 $41.00

SAE AMS2759/2H, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for heat treatment of low-alloy steel parts to minimum ultimate tensile strengths of 220 ksi (1517 MPa) and higher. Parts are defined in AMS2759. The requirements for heat treatment of alloy Aermet100 are no longer part of this specification and can be found in AMS2759/3. Due to the limited hardenability of these materials, size limits have been added to this specification.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6324H

SAE AMS6324H

Steel Bars, Forgings, and Tubing, 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740 Modified)..

$41.00 $81.00

SAE AS1895/12D

SAE AS1895/12D

FLANGE END, MALE, TYPE I STANDARD PROFILE, DESIGN STANDARD..

$41.00 $81.00

SAE AMS3660D

SAE AMS3660D

Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered..

$41.00 $81.00

SAE J1774_201006

SAE J1774_201006

Design Guidelines for Fiberboard Materials..

$41.00 $81.00