• SAE AMS2759/9D

SAE AMS2759/9D

  • Hydrogen Embrittlement Relief (Baking) of Steel Parts
  • standard by SAE International, 05/15/2009
  • Category: SAE

$81.00 $41.00

This specification covers the requirements for embrittlement relief (baking) of heat treated steel parts to remove hydrogen infused during plating and other chemical processing (e.g., stripping, chemical milling, pickling, and etching).

This specification is applicable to parts made from carbon, low-alloy, and martensitic stainless steel heat treated to a minimum strength of 180 ksi (1241 MPa) or higher heat treated to a minimum hardness of 40 HRC or equivalent, or harder. It is also applicable to threaded fasteners made from carbon, low-alloy, or martensitic stainless steels heat treated to a minimum strength of 150 ksi (1034 MPa) or 34 HRC or equivalent, parts made from high strength precipitation hardening stainless steels other than A-286, and steel parts which have been case hardened (carburized, nitrided, nitrocarburized, or carbonitrided).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4942G

SAE AMS4942G

Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength..

$41.00 $81.00

SAE AMS5340E

SAE AMS5340E

Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenizat..

$41.00 $81.00

SAE AMS5395D

SAE AMS5395D

Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As Cast (Stabilized: Mar 2..

$41.00 $81.00

SAE AMS5631F

SAE AMS5631F

Steel, Corrosion-Resistant, Bars and Forgings 17Cr (0.60 - 0.75C) (440A)..

$41.00 $81.00