• SAE AMS3100C

SAE AMS3100C

  • Adhesion Promoter For Polysulfide Sealing Compounds
  • standard by SAE International, 05/27/2009
  • Category: SAE

$81.00 $41.00

This specification covers adhesion promoters in the formof a liquid, either in bulk or aerosol form.

This product has been used typically to enhance the adhesion of polysulfide sealing compounds or adhesives to AMS-C-27725 integral fuel tank coating, MIL-PRF-23377 epoxy primer, MIL-PRF-85582 water borne primer, and bare titanium alloy substrates, but usage is not limited to such applications. Care should be exercised around plastic substrates (e.g. polycarbonates, acrylics) as the formulary solvents may tend to craze these surfaces.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS85421B

SAE AS85421B

Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For..

$41.00 $81.00

SAE AS6213A

SAE AS6213A

FITTING, ADAPTER, PORT, REDUCER, 37¿¿ SPHERICAL, FLARED..

$41.00 $81.00

SAE AMS4600A

SAE AMS4600A

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold..

$41.00 $81.00

SAE AMS6272N

SAE AMS6272N

Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)..

$41.00 $81.00