• SAE AMS3100D

SAE AMS3100D

  • Adhesion Promoter For Polysulfide Sealing Compounds
  • standard by SAE International, 11/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers adhesion promoters in the form of a liquid, either in bulk or aerosol form. This product has been typically used to enhance the adhesion of polysulfide sealing compounds or adhesives to AMS-C-27725 integral fuel tank coating, MIL-PRF-23377 epoxy primer, MIL-PRF-85582 waterborne primer, and bare titanium alloy substrates, but usage is not limited to such applications. Care should be exercised around plastic substrates (e.g. polycarbonates, acrylics) as the formulary solvents may tend to craze these surfaces. AMS3100 Class 2 may contain halogenated solvents that could cause stress-corrosion cracking when used on titanium alloys which will be subjected to temperatures above 450 °F (232 °C) or on high strength steels. Users of this specification should be attentive to reference the appropriate class of promoter for their specific applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4037Q

SAE AMS4037Q

Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution ..

$41.00 $81.00

SAE AS5973A

SAE AS5973A

FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI..

$41.00 $81.00

SAE AS4300C

SAE AS4300C

FITTING ASSEMBLY, CAP, FLARELESS PROTECTIVE CLOSURE, LOW PRESSURE..

$41.00 $81.00

SAE AIR1358C

SAE AIR1358C

Aerospace Information Report for Continuous Flow Oxygen Hose Disconnect Fittings (Stabilized: Dec 20..

$41.00 $81.00