SAE AMS3265D
- Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting for Intermittent Use to 360°F (182Â
- standard by SAE International, 12/29/2008
- Category: SAE
$81.00
$41.00
This specification covers a polysulfide (T) rubber sealing compound with non-chromated corrosion inhibitors, supplied as a two component system which cures at room temperature.
This product has been used typically for contact with air pressures, fuels and water, but usage is not limited to such applications. Each application should be considered separately. Polysulfide (T) rubber has a service temperature range of -65 to +250 \mDF (-54 to +121 \mDC), with short term recurring exposures (approximately 6 hours) to 360 \mDF (182 \mDC). It can be used for aerodynamic smoothing, cabin pressure and fillet sealing and fastener overcoating.
This product has been used typically for contact with air pressures, fuels and water, but usage is not limited to such applications. Each application should be considered separately. Polysulfide (T) rubber has a service temperature range of -65 to +250 \mDF (-54 to +121 \mDC), with short term recurring exposures (approximately 6 hours) to 360 \mDF (182 \mDC). It can be used for aerodynamic smoothing, cabin pressure and fillet sealing and fastener overcoating.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
