• SAE AMS3277F

SAE AMS3277F

  • Sealing Compound, Polythioether Rubber, Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360\mDF (18
  • standard by SAE International, 12/29/2010
  • Category: SAE

$81.00 $41.00

This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two component system which cures at room temperature.

This product has been used in aircraft integral fuel tanks for repair of fillet and fastener seals and faying surface seals as well as initial sealing of faying surfaces, overcoating of fasteners, and sealing of seams and joints, for service from -80 to +320\mDF (-62 to +160\mDC), with short-term recurring exposures (approximately six hours) up to 360\mDF (182\mDC), but usage is not limited to such applications. This product is not recommended for use on aircraft windshields or canopies or other applications where crazing or degradation of plastic components may occur. Sealing compound must be applied at temperatures above 50\mDF (10\mDC), but will cure at lower temperatures.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS85049/48B

SAE AS85049/48B

Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (For MIL-DTL-24308 Connector..

$41.00 $81.00

SAE AS25486A

SAE AS25486A

Connector, Plug, Attachable, External Electric Power, Aircraft, 115/200 Volt, 400 Hertz..

$41.00 $81.00

SAE J1630_201101

SAE J1630_201101

Airbag Module Deployment Test Procedure..

$41.00 $81.00

SAE J581_201102

SAE J581_201102

Auxiliary High Beam Lamps (Stabilized: Feb 2011)..

$41.00 $81.00