• SAE AMS3279D

SAE AMS3279D

  • Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 ¿¿F (177 ¿¿C) (Stabilize
  • standard by SAE International, 03/12/2013
  • Category: SAE

$81.00 $41.00

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

This specification covers one type of sprayable fuel resistant polythioether urethane sealing compound supplied as a two-component system.

This sealing compound has been used typically for sealing metal and composite integral fuel tanks by spray application, but usage is not limited to such applications. It can be used for original fuel tank sealing of seams, joints, fasteners and fay surface edges or for repair of conventional fillet and fastener seals. As a fuel containment barrier, it can also be used on the interior or exterior of auxiliary fuel tanks and fuel cell cavities. It can be cured at ambient temperatures or with mild heat up to 140 \mDF (60 \mDC) following an initial 4 to 5 hour ambient cure period after each coating application. A primer, specifiedby the sealant manufacturer, is required with the sealing compound and must be applied prior to sealing. The sealingcompound can be applied in fuel tank and non-fuel tank areas by the use of a spray gun. Sealant can be applied by brush for small touch-up areas. The sealing compound is usable long term from -65 to 250 \mDF (-54 to + 121 \mDC), with short term exposure (approximately 6 hours) to 350 \mDF (171 \mDC).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1731_201708

SAE J1731_201708

Pilot Bearings for Truck and Bus Applications (Stabilized: Aug 2017)..

$41.00 $81.00

SAE J1806_201708

SAE J1806_201708

Clutch Dimensions for Truck and Bus Applications (Stabilized: Aug 2017)..

$41.00 $81.00

SAE J2927_201708

SAE J2927_201708

R-1234yf Refrigerant Identifier Installed In Recovery and Recycling Equipment for Use With Mobile A/..

$41.00 $81.00

SAE J306_201708

SAE J306_201708

Automotive Gear Lubricant Viscosity Classification..

$41.00 $81.00