• SAE AMS3305J

SAE AMS3305J

  • Silicone, Rubber General Purpose 80 Durometer
  • standard by SAE International, 11/07/2014
  • Category: SAE

$81.00 $41.00

This specification covers a silicone rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. Primarily for parts required to operate or seal from -65 to +205 degrees C (-85 to +401 degrees F). Silicone elastomer is resistant to deterioration by weathering and petroleum-base lubricating oil and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromtic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS7413

SAE AS7413

Coupling Assemblies, Quick Disconnect, Automatic Shutoff..

$41.00 $81.00

SAE J2629_201106

SAE J2629_201106

Standard Formats for Presenting Acoustical Data..

$41.00 $81.00

SAE AMS6358J

SAE AMS6358J

Steel Sheet, Strip, and Plate, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)..

$41.00 $81.00

SAE J254_201106

SAE J254_201106

Instrumentation and Techniques for Exhaust Gas Emissions Measurement (Stabilized: Jun 2011)..

$41.00 $81.00