• SAE AMS3306C

SAE AMS3306C

  • Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
  • standard by SAE International, 05/27/2014
  • Category: SAE

$81.00 $41.00

This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes.

These products have been used typically as seals from -65 degrees to +225 degrees C (-85 degrees to +437 degrees F), compounded especially for high strength. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base lubricating oil and phosphate ester hydraulic fluid, and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with hydrocarbon-based fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer, but usage is not limited to such applications. Each application should be considered individually.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5839B

SAE AMS5839B

Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al..

$41.00 $81.00

SAE J397_200910

SAE J397_200910

Deflection Limiting Volume--Protective Structures Laboratory Evaluation..

$41.00 $81.00

SAE MA5405/1A

SAE MA5405/1A

SPLICE, FIBER OPTIC, AEROSPACE INTER-CONNECT, GRADED INDEX 100/140/172 CABLE SIZE..

$41.00 $81.00

SAE AS 9705A

SAE AS 9705A

Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .19..

$41.00 $81.00