• SAE AMS3346G

SAE AMS3346G

  • Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
  • standard by SAE International, 07/19/2013
  • Category: SAE

$81.00 $41.00

This specification covers a silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4252C

SAE AMS4252C

Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated, Stress Reli..

$41.00 $81.00

SAE AMS5788G

SAE AMS5788G

Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C..

$41.00 $81.00

SAE J2579_201806

SAE J2579_201806

Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles..

$41.00 $81.00

SAE J2833_201806

SAE J2833_201806

Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, St..

$41.00 $81.00