• SAE AMS3347C

SAE AMS3347C

  • Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 ¿¿¿ 55
  • standard by SAE International, 05/08/2014
  • Category: SAE

$81.00 $41.00

This specification covers a silicone rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -75 to +205 degrees C (-103 to +401 degrees F), compounded especially for high strength. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point-petroleum-base oils and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1140_201208

SAE J1140_201208

Filler Pipes and Openings of Motor Vehicle Fuel Tanks..

$41.00 $81.00

SAE J1369_201208

SAE J1369_201208

Anchorage Provisions for Installation of Child Restraint Tether Straps in Rear Seating Positions (St..

$41.00 $81.00

SAE J 1495

SAE J 1495

Test Procedure for Battery Flame Retardant Venting Systems..

$41.00 $81.00

SAE J2490_201208

SAE J2490_201208

SAE No. 2 Friction Test Machine ¿¿PVT Test..

$41.00 $81.00