• SAE AMS3353

SAE AMS3353

  • Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40¿¿F (-40¿¿C) For Elastomeric Parts in Airc
  • standard by SAE International, 04/14/2009
  • Category: SAE

$81.00 $41.00

This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of sheet, strip, tubing, extrusions and molded shapes for aeronautical and aerospace applications.

This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets. For those applications AMS7379 should be used.

These products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels, and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. This fluorocarbon (FKM) has a service temperature range of -60 to +400\mDF (-51 to +204\mDC) in air.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4056H

SAE AMS4056H

Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-O) Annealed..

$41.00 $81.00

SAE AMS4100F

SAE AMS4100F

Aluminum Alloy, Alclad, Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipi..

$41.00 $81.00

SAE AMS4458A

SAE AMS4458A

Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked and Art..

$41.00 $81.00

SAE AMS4773G

SAE AMS4773G

Silver Alloy, Brazing Filler Metal 60Ag ¿¿¿ 30Cu ¿¿¿ 10Sn 1115 to 1325 ¿¿F (602 to 718 ¿¿C) Solidus-..

$41.00 $81.00