• SAE AMS3644G

SAE AMS3644G

  • Plastic: Polyimide For Molded Rod, Bar, and Tube, Plaque, and Formed Parts
  • standard by SAE International, 11/16/2016
  • Category: SAE

$81.00 $41.00

This specification covers a polyimide plastic in the form of isostatically molded rod, bar, and tube, unidirectionally molded plaque, and direct formed parts.

These products have been used typically for bushings, bearings, seals, and thermal-electrical insulators requiring a combination of toughness, low coefficient of friction, low wear, low creep, and good solvent resistance, but usage is not limited to such applications. Each application should be considered separately. Polyimide covered by this specification has a service temperature range of cryogenic to 500 \mDF (260 \mDC). These materials have no observable glass transition temperature (Tg) or melt temperature (Tm).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6413M

SAE AMS6413M

Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)..

$41.00 $81.00

SAE J2040_201601

SAE J2040_201601

Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width..

$41.00 $81.00

SAE J1432_201601

SAE J1432_201601

Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or ..

$41.00 $81.00

SAE AS85049/143A

SAE AS85049/143A

CONNECTOR ACCESSORIES, BACKSHELL, STRAIN RELIEF, CATEGORY 4C (FOR AS81714, SIZE 22, 20, AND 16 TERMI..

$41.00 $81.00