• SAE AMS3652D

SAE AMS3652D

  • Polytetrafluoroethylene (PTFE) Film Non-Critical Grade (Stabilized: May 2015)
  • standard by SAE International, 05/13/2015
  • Category: SAE

$81.00 $41.00

This specification covers one grade of polytetrafluoroethylene (PTFE) resin in the form of film, normally produced by skiving. This film has been used typically for gaskets and other parts for use up to 260 degrees C (500 degrees F) where chemical resistance or anti-stick characteristics are required but where high mechanical or electrical characteristics are not important, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4413B

SAE AMS4413B

Aluminum Alloy, Plate, 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84), Solution Heat T..

$41.00 $81.00

SAE AMS5044K

SAE AMS5044K

Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper..

$41.00 $81.00

SAE AMS5121L

SAE AMS5121L

Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed..

$41.00 $81.00

SAE AMS5349F

SAE AMS5349F

Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered..

$41.00 $81.00