• SAE AMS3656G

SAE AMS3656G

  • Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
  • standard by SAE International, 07/14/2010
  • Category: SAE

$81.00 $41.00

This specification covers a virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded and sintered rods, tubes, and profiles.

These products have been used typically for parts, such as insulators and bushings requiring chemical inertness up to 500 \mDF (260 \mDC), but usage is not limited to such applications. For such applications such as bearing, seals, and back-up rings that do not require dielectric properties and radiographic inspection it is recommended to us AMS 3678/1 Grade B.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2667G

SAE AMS2667G

Brazing, Silver For Small Pressurized Fittings..

$41.00 $81.00

SAE AIR4766/1

SAE AIR4766/1

Air Quality for Commercial Aircraft Cabin Particulate Contaminants..

$41.00 $81.00

SAE ARP5483/4A

SAE ARP5483/4A

Rolling Element Test Method for Axial Limit and Fracture Load Testing..

$41.00 $81.00

SAE ARP5483/5A

SAE ARP5483/5A

Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing..

$41.00 $81.00