SAE AMS3658F
- Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected (Stabilized:
- standard by SAE International, 08/25/2011
- Category: SAE
$81.00
$41.00
This specification covers virgin unfilled polytetrafluoroethylene (PTFE) in the form of extruded rods, tubes, and shapes.
These products have been used typically for parts, such as insulators and bushings requiring chemical inertness and dimensional stability up to 500 \mDF (260 \mDC) and better mechanical and/or electrical properties than AMS 3656, but usage is not limited to such applications. for applications such as seals, back-up rings and bearings that do not require dielectric properties and radiographic inspection it is recommended to use AMS 3678/1 Grade B.
These products have been used typically for parts, such as insulators and bushings requiring chemical inertness and dimensional stability up to 500 \mDF (260 \mDC) and better mechanical and/or electrical properties than AMS 3656, but usage is not limited to such applications. for applications such as seals, back-up rings and bearings that do not require dielectric properties and radiographic inspection it is recommended to use AMS 3678/1 Grade B.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
