• SAE AMS3659F

SAE AMS3659F

  • Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved (Stabilized: Aug 2011)
  • standard by SAE International, 08/25/2011
  • Category: SAE

$81.00 $41.00

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded rods, tubes, and profiles.

These products have been used typically for parts, such as bushings and insulators, requiring better chemical inertness and dimensional stability up to 500 \mDF (260 \mDC) than AMS 3657 and better mechanical and electrical properties than AMS 3656, but usage is not limited to such applications. For spplications such as bearings, seals, and back-up rings that do not require dielectric properties it is recommended to use AMS 3678/1 Grade B.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2451/1B

SAE AMS2451/1B

Plating, Brush, Nickel General Purpose..

$41.00 $81.00

SAE AMS2451/5B

SAE AMS2451/5B

Plating, Brush, Chromium Hard Deposit, Trivalent..

$41.00 $81.00

SAE AS157G

SAE AS157G

HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT..

$41.00 $81.00

SAE J361_201704

SAE J361_201704

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim..

$41.00 $81.00