• SAE AMS3678/10A

SAE AMS3678/10A

  • Type 10, Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers a polytetrafluoroethylene (PTFE) resin filled with carbon fiber in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for parts such as backup rings and seal elements in both static and dynamic applications requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2451/14

SAE AMS2451/14

Plating, Brush, Nickel-Tungsten Low Hydrogen Embrittlement..

$41.00 $81.00

SAE ARP1287B

SAE ARP1287B

SAE Standards for Use in the Design of Aerospace Vehicular Ground Equipment (Stabilized: Feb 2017)..

$41.00 $81.00

SAE AS31061B

SAE AS31061B

CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE..

$41.00 $81.00

SAE AS81765A

SAE AS81765A

Insulating Components, Molded, Electrical, Heat Shrinkable, General Specification For (Stabilized: F..

$41.00 $81.00