• SAE AMS3678/1B

SAE AMS3678/1B

  • Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers an unfilled grade of virgin polytetrafluoroethylene (PTFE) resin in the form of extruded or molded rods or tubes which are sintered after molding, or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for parts such as backup rings and seal component for static and light duty applications requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS15002D

SAE AS15002D

Fitting, Lubrication, Hydraulic, Surface Check, Straight Threads, Steel, Type II..

$41.00 $81.00

SAE AS6034

SAE AS6034

Clamp, Loop Type Support - Heat Resistant, AMS5599..

$41.00 $81.00

SAE AS6450B

SAE AS6450B

Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Other Fluid Systems..

$41.00 $81.00

SAE J2740_201905

SAE J2740_201905

General Motors UART Serial Data Communications..

$41.00 $81.00