• SAE AMS3678/2A

SAE AMS3678/2A

  • Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% graphite in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for seal components for dynamic reciprocating and rotary applications requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3090B

SAE AMS3090B

Lubricant, Dry Film, Heat Cured, For Fasteners Polysulfide Sealant Compatible (Stabilized: Sep 2011)..

$41.00 $81.00

SAE AMS3101B

SAE AMS3101B

Adhesion Promoter For Polysulfide Sealants, Non-crazing of Acrylic and Polycarbonate (Stabilized: Se..

$41.00 $81.00

SAE AMS3108G

SAE AMS3108G

Primer, Ocher Phenolic (Stabilized: Sep 2011)..

$41.00 $81.00

SAE AMS3243G

SAE AMS3243G

Chloroprene (CR) Rubber Flame Resistant 55 - 65 (Stabilized: Sep 2011)..

$41.00 $81.00