• SAE AMS3678/3A

SAE AMS3678/3A

  • Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% glass fiber and 5% molybdenum disulfide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for seal components requiring high temperature and pressure resistance and dimensional stability up to 450 \mDF (232 \mDC) with good wear resistance, but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1191_201110

SAE J1191_201110

High Tension Ignition Cable Assemblies - Marine..

$41.00 $81.00

SAE J1197_201110

SAE J1197_201110

Rated Operating Load for Loaders Equipped with Log or Material Forks Without Vertical Mast (Stabiliz..

$41.00 $81.00

SAE J1325_201110

SAE J1325_201110

Test Method for Measuring the Relative Drapeability of Flexible Insulation Materials (Stabilized: Oc..

$41.00 $81.00

SAE J1337_201110

SAE J1337_201110

Off-Road Rim Maintenance Procedures and Service Precautions Diameter Code 20 and Larger..

$41.00 $81.00