• SAE AMS3678/4A

SAE AMS3678/4A

  • Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 25% glass fiber in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for dynamic seal components requiring dimensional stability up to 450 \mDF (232 \mDC), but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5637J

SAE AMS5637J

Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and S..

$41.00 $81.00

SAE J2794_201807

SAE J2794_201807

Power Cylinder Oil Consumption: Transport Mechanisms..

$41.00 $81.00

SAE J2796_201807

SAE J2796_201807

Power Cylinder Oil Consumption: Methods of Measurements..

$41.00 $81.00

SAE AMS2410L

SAE AMS2410L

Plating, Silver Nickel Strike, High Bake..

$41.00 $81.00