• SAE AMS3678/5A

SAE AMS3678/5A

  • Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers a polytetrafluoroethylene (PTFE) resin filledwith inorganic pigment in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for parts such as backup rings and seal elements in both static and dynamic applications requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4685C

SAE AS4685C

FITTING, ELBOW, 90¿¿, REDUCER FLARELESS AND SHORT FLARELESS..

$41.00 $81.00

SAE AS50141B

SAE AS50141B

Tube, Pneumatic Tire, Aircraft..

$41.00 $81.00

SAE AMS5338H

SAE AMS5338H

Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (4140 Mod) Normalized or Normalized and Te..

$41.00 $81.00

SAE AS27646/1A

SAE AS27646/1A

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)..

$41.00 $81.00