• SAE AMS3678/7A

SAE AMS3678/7A

  • Type 7, Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite
  • standard by SAE International, 11/30/2010
  • Category: SAE

$81.00 $41.00

This specification covers a polytetrafluoroethylene (PTFE) resin filled with carbon and graphite in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

These products have been used typically for parts such as backup rings and seal elements in both static and dynamic applications requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3579D

SAE AMS3579D

Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable ..

$41.00 $81.00

SAE AMS3582A

SAE AMS3582A

Plastic Tubing, Electrical Insulation Crosslinked Polyvinyl Chloride, Flexible Heat Shrinkable 2 to ..

$41.00 $81.00

SAE J1113/11_201201

SAE J1113/11_201201

Immunity to Conducted Transients on Power Leads..

$41.00 $81.00

SAE AS9216C

SAE AS9216C

SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED..

$41.00 $81.00