• SAE AMS3726D

SAE AMS3726D

  • Shims, Filled Resin Compound
  • standard by SAE International, 08/18/2010
  • Category: SAE

$81.00 $41.00

This specification covers filled, thermosetting resin compounds capable of being applied and cured in place between the surfaces of mechanically fastened (joined) structures.

These products have been typically used as molded shims during assembly of aircraft components and parts requiring good flatwise compression properties and adhesion to metallic or nonmetallic materials, but usage is not limited to such applications. In most applications, the compound will be required to adhere to only one of the mating surfaces; i.e., the compound is not intended to be an adhesive. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE ARP5283B

SAE ARP5283B

Nose Gear Towbarless Tow Vehicle Basic Test Requirements..

$41.00 $81.00

SAE ARP5305A

SAE ARP5305A

Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells..

$41.00 $81.00

SAE AS5259/3B

SAE AS5259/3B

CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, DIE TYPE, WIRE SIZES 8 TO 0000 UN-INSULATED AND INSULA..

$41.00 $81.00

SAE AMS4601A

SAE AMS4601A

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold..

$41.00 $81.00