• SAE AMS3726E

SAE AMS3726E

  • Shims, Filled Resin Compound (Stabilized: Aug 2011)
  • standard by SAE International, 08/25/2011
  • Category: SAE

$81.00 $41.00

This specification covers filled, thermosetting resin compounds capable of being applied and cured in place between the surfaces of mechanically fastened (joined) structures.

These products have been typically used as molded shims during assembly of aircraft components and parts requiring good flatwise compression properties and adhesion to metallic or nonmetallic materials, but usage is not limited to such applications. In most applications, the compound will be required to adhere to only one of the mating surfaces; i.e., the compound is not intended to be an adhesive. Each application should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5518M

SAE AMS5518M

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Stren..

$41.00 $81.00

SAE AS27198B

SAE AS27198B

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL..

$41.00 $81.00

SAE AS31001B

SAE AS31001B

CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE..

$41.00 $81.00

SAE AS33411B

SAE AS33411B

BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS..

$41.00 $81.00