• SAE AMS3914

SAE AMS3914

  • Advanced Composites Prepreg - Nominal 250 °F Cure – 12K Tow Carbon Fiber and Epoxy Resin, Plain Weave Fabric
  • standard by SAE International, 09/14/2012
  • Category: SAE

$81.00 $41.00

This specification establishes the requirements for a nominal 250 \mDF cure epoxy preimpregnated carbon fiber plain weave fabric product. The prepreg is a plain weave fabric with 12K tows, a nominal fiber areal weight of 193 gsm, and nominal resin content of 42%.

The purpose of this specification is to allow procurement of a defined material corresponding to the statistically derived material properties published in MIL-HDBK-17.

This material is intended for use in laminate applications with a service temperature of -65 to 180 \mDF.

The composite may be used for the manufacture of primary and secondary aircraft structure.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J387_201204

SAE J387_201204

Terminology - Motor Vehicle Lighting..

$41.00 $81.00

SAE J575_201204

SAE J575_201204

Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Wid..

$41.00 $81.00

SAE AMS5620G

SAE AMS5620G

Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420..

$41.00 $81.00

SAE AMS5719D

SAE AMS5719D

Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8M..

$41.00 $81.00