• SAE AMS4035L

SAE AMS4035L

  • Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed; or when specified, “As Fabricated” (2024-F)
  • standard by SAE International, 12/19/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate supplied in the annealed (0) condition. When specified, product shall be supplied in the "as fabricated" (F) temper.

These products have been used typically for formed structural parts which will be subsequently heat treated, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to be susceptible to stress-corrosion cracking after heat treatment; SAE ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5678F

SAE AMS5678F

Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable..

$41.00 $81.00

SAE AMS5365E

SAE AMS5365E

Steel Castings, Sand, Corrosion and Heat Resistant 24.5Cr - 20.5Ni Solution Heat Treated..

$41.00 $81.00

SAE AMS2262G

SAE AMS2262G

Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate..

$41.00 $81.00

SAE AS4137B

SAE AS4137B

Fitting Assy, Elbow, Reducer, 45°, Swivel, Reduced Body, Flareless..

$41.00 $81.00