• SAE AMS4037P

SAE AMS4037P

  • Aluminum Alloy, Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated
  • standard by SAE International, 12/19/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate.

These products have been typically used for formed structural parts of good strength. Plate is also suitable for structural machined parts where warpage, during maching, due to residual stresses must be minimized, but usage is not limited to such application.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6479C

SAE AMS6479C

Steel, Bars, Forgings, and Tubing, 1.45Cr (0.98 - 1.05C) (SAE 52100), Special Aircraft-Quality Clean..

$41.00 $81.00

SAE J1113/13_201106

SAE J1113/13_201106

Electromagnetic Compatibility Measurement Procedure for Vehicle Components--Part 13: Immunity to Ele..

$41.00 $81.00

SAE AMS7273D

SAE AMS7273D

Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant For Seals In Fuel Systems and ..

$41.00 $81.00

SAE AMS7276H

SAE AMS7276H

Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Sy..

$41.00 $81.00