• SAE AMS4040N

SAE AMS4040N

  • Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 ¿% Alclad); Annealed
  • standard by SAE International, 07/25/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate clad on both sides with a different aluminum alloy.

These products have been used typically for formed structural parts which will be subsequently heat treated, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS7274J

SAE AMS7274J

Rubber: Butadiene-Acrylonitrile (NBR) 65 to 75 Hardness, For Elastomeric Seals in Aircraft Engine Oi..

$41.00 $81.00

SAE J1698_201405

SAE J1698_201405

Event Data Recorder..

$41.00 $81.00

SAE AMS3198L

SAE AMS3198L

Sponge, Chloroprene (CR) Rubber Medium Stiffness (Stabilized: May 2014)..

$41.00 $81.00

SAE ARP5891

SAE ARP5891

Achieving Cleanliness Standards for Aircraft Hydraulic Systems During Manufacture..

$41.00 $81.00