• SAE AMS4046F

SAE AMS4046F

  • Aluminum Alloy Sheet and Plate, Alclad One Side 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad One Side 7075; -T6 Sheet -T651 Plate) Sol
  • standard by SAE International, 03/29/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate clad on one side. These products have been used typically for structural components, including chemically milled and machined parts subject to excessive warpage during maching, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5715F

SAE AMS5715F

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60.5Ni - 23Cr - 14Fe - 1.4Al A..

$41.00 $81.00

SAE AIR5914

SAE AIR5914

Landing Gear Fatigue Spectrum Development For Part 25 Aircraft..

$41.00 $81.00

SAE J1979DA_201406

SAE J1979DA_201406

J1979-DA, Digital Annex of E/E Diagnostic Test Modes..

$41.00 $81.00

SAE AMS5743J

SAE AMS5743J

Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat ..

$41.00 $81.00