• SAE AMS4049L

SAE AMS4049L

  • Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precip
  • standard by SAE International, 12/29/2010
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate, clad on two sides.

These products have been used typically for structural use, including machined parts subject to excessive warpage during machining.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5838E

SAE AMS5838E

Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La..

$41.00 $81.00

SAE AMS3792/3B

SAE AMS3792/3B

Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking Strength (Stabilized: Feb 2012)..

$41.00 $81.00

SAE AMS4779G

SAE AMS4779G

Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Li..

$41.00 $81.00

SAE AMS4782F

SAE AMS4782F

Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Li..

$41.00 $81.00