• SAE AMS4095C

SAE AMS4095C

  • Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated an
  • standard by SAE International, 04/03/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate.

These products have been used typically for parts requiring high strength up to 600 degrees F (316 degrees C) and are well suited for cryogenic applications and where welding and maximum corrosion resistance are required, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS6462B

SAE AS6462B

AS5553B, Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts; Avoidance, Detection,..

$41.00 $81.00

SAE AMS7008

SAE AMS7008

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 47.5Ni - 22Cr - 1.5Co..

$41.00 $81.00

SAE AMS3673D

SAE AMS3673D

Cloth, Glass Aluminum Face, Silicone Rubber Back..

$41.00 $81.00

SAE AMS3681F

SAE AMS3681F

Adhesive, Electrically Conductive Silver-Filled Epoxy Resin..

$41.00 $81.00