• SAE AMS4096C

SAE AMS4096C

  • Aluminum Alloy Sheet and Plate, Alclad, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-O), Annealed
  • standard by SAE International, 10/28/2010
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate.

This specification has been used typically for parts requiring high strength up to 600 \mDF (315 \mDF). These products are also well suited for cryogenic applications and where welding and maximum corrosion resistance are required, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2773C

SAE AMS2773C

Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts..

$41.00 $81.00

SAE J2836/2_201109

SAE J2836/2_201109

Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger..

$41.00 $81.00

SAE ARP1384D

SAE ARP1384D

Passenger Safety Briefing Materials..

$41.00 $81.00

SAE AMS4452D

SAE AMS4452D

Magnesium Alloy, Investment Castings 8.7Al 0.70Zn 0.22Mn (AZ 91C-T6) Solution and Precipitation Heat..

$41.00 $81.00