• SAE AMS4122K

SAE AMS4122K

  • Aluminum Alloy, Bars, Rods, and Wire Rolled or Cold Finished, and Rings, 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6) Solution and Precipi
  • standard by SAE International, 11/20/2007
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire, and of flash welded rings.

These products have been used typically for parts requiring high strength where limited formability is acceptable.

Certain design and processing procedures may cause these products to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS21230A

SAE AS21230A

BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING PTFE LINED, WIDE..

$41.00 $81.00

SAE AMS2518D

SAE AMS2518D

Thread Compound, Anti-Seize, Graphite-Petrolatum (Stabilized: Feb 2012)..

$41.00 $81.00

SAE AMS3057A

SAE AMS3057A

Lubricant, Semi-Fluid, for Aircraft Gearboxes (Stabilized: Feb 2012)..

$41.00 $81.00

SAE AMS4185E

SAE AMS4185E

Filler Metal, Aluminum Brazing 12Si (4047)..

$41.00 $81.00