• SAE AMS4126C

SAE AMS4126C

  • Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat
  • standard by SAE International, 10/18/2010
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of die forgings, hand forgings, rolled rings, and stock for forging or rolled rings.

These products have been ued typically for applications requiring high strength in light-to-medium sections, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS33681C

SAE AS33681C

STRAP, TIEDOWN, ELECTRICAL COMPONENTS, IDENTIFICATION, ADJUSTABLE, SELF-CLINCHING, PLASTIC, TYPE II,..

$41.00 $81.00

SAE AS81819A

SAE AS81819A

Bearings, Plain, Self-Aligning, Self-Lubricating, High Speed Oscillation -65 to +160 ¿¿F General Spe..

$41.00 $81.00

SAE AMS2431/2F

SAE AMS2431/2F

Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC)..

$41.00 $81.00

SAE AMS4612K

SAE AMS4612K

Brass, Naval, Bars and Rods 60.5Cu - 38.5Zn - 0.75Sn Hard Temper (H04)..

$41.00 $81.00