• SAE AMS4128D

SAE AMS4128D

  • Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relie
  • standard by SAE International, 09/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50mm) and over in nominal diameter or least difference between parallel sides.

These bars have been used typically for parts where moderate ductility, formability, and response to precipitation heat treatment are required and where distortion during machining must be minimized, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS5131

SAE AS5131

TUBE END - BEADED, DESIGN STANDARD..

$41.00 $81.00

SAE AS3166

SAE AS3166

UNION, TUBE - CRES AMS 5646, CONICAL END, CONNECTOR..

$41.00 $81.00

SAE AS4807C

SAE AS4807C

FITTING ASSEMBLY, ELBOW, 90°, BEAM SEAL, RETAINED NUT..

$41.00 $81.00

SAE AS4678C

SAE AS4678C

NUT, BULKHEAD SHORT FLARELESS..

$41.00 $81.00