• SAE AMS4169L

SAE AMS4169L

  • Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Str
  • standard by SAE International, 01/09/2012
  • Category: SAE

$81.00 $41.00

This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of January 2012 and has been superseded by SAE AMS 4154. The requirements of the latest issue of SAE AMS 4154 shall be fulfilled whenever reference is made to the cancelled AMS 4169. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Materials Specifications, noting that it has been superseded by SAE AMS 4154.

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.

These extrusions have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2659_201207

SAE J2659_201207

Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation..

$41.00 $81.00

SAE USCAR1-2

SAE USCAR1-2

SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES..

$41.00 $81.00

SAE USCAR5-4

SAE USCAR5-4

AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL..

$41.00 $81.00

SAE USCAR7-1

SAE USCAR7-1

DEEMBRITTLEMENT VERIFICATION TEST..

$41.00 $81.00