• SAE AMS4186D

SAE AMS4186D

  • Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated, or when spec
  • standard by SAE International, 05/30/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of bars, rods, and wire in the "asfabricated (F) temper. When specified, product shall be supplied in the annealed (O) condition.

These products have been typically used for parts requiring forming and as stock for flash welded rings which are to be subsequently solution and precipitation heat treated, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after solution and precipitation heat treatment; ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5796F

SAE AMS5796F

Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni -15W..

$41.00 $81.00

SAE J2188_201807

SAE J2188_201807

Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting (..

$41.00 $81.00

SAE AMS4248D

SAE AMS4248D

Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution ..

$41.00 $81.00

SAE AMS4482A

SAE AMS4482A

Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, ..

$41.00 $81.00