• SAE AMS4256C

SAE AMS4256C

  • Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated
  • standard by SAE International, 03/23/2018
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet 0.010 to 0.249 inch (0.25 to 6.32 mm) inclusive, in nominal thickness, clad on two sides (see 8.4).

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2904_201805

SAE J2904_201805

Power Cylinder Friction: Mechanisms..

$41.00 $81.00

SAE J2928_201805

SAE J2928_201805

Brake Rotor Thermal Cracking Procedure for Vehicles Below 4 540 kg GVWR..

$41.00 $81.00

SAE MA3375D

SAE MA3375D

Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specific..

$41.00 $81.00

SAE AMS5402D

SAE AMS5402D

Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) A..

$41.00 $81.00