• SAE AMS4274A

SAE AMS4274A

  • Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0) Annealed, Fine Grain
  • standard by SAE International, 09/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet.

This sheet has been used typically for severely formed structured parts which will be subsequently heat treated and painted or otherwise protected from corrosion, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5062H

SAE AMS5062H

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum..

$41.00 $81.00

SAE AMS7301H

SAE AMS7301H

Steel, Highly-Stressed Springs 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) Case Hardened..

$41.00 $81.00

SAE AMS7311G

SAE AMS7311G

Piston Rings, Centrifugally-Case Alloyed Iron 0.50Mo - 0.50Cu..

$41.00 $81.00

SAE AMS5115H

SAE AMS5115H

Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered..

$41.00 $81.00