• SAE AMS4276A

SAE AMS4276A

  • Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed, Fine Grained
  • standard by SAE International, 11/14/2017
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet with fine grain structure.

This sheet has been used typically for severely-formed structural parts which will be subsequently heat treated and painted or otherwise protected from corrosion, but usage is not limited to such applications.

Certain design and processing procedures may cuase this sheet to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS1033F

SAE AS1033F

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED..

$41.00 $81.00

SAE AS1035F

SAE AS1035F

FITTING, TEE, STANDARD AND REDUCER, FLARED..

$41.00 $81.00

SAE AS1036H

SAE AS1036H

FITTING, CROSS, STANDARD AND REDUCER, FLARED..

$41.00 $81.00

SAE AS15720C

SAE AS15720C

FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION RESISTANT..

$41.00 $81.00