• SAE AMS4308A

SAE AMS4308A

  • Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened
  • standard by SAE International, 12/04/2013
  • Category: SAE

$81.00 $41.00

This specification has been declared “NONCURRENT” by the Aerospace Materials Division, SAE, as of October, 2003. It is recommended, therefore, that this specification not be specified for new designs. “NONCURRENT” refers to those materials which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division, however, does not recommend these as standard materials for future use in new designs.

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

This sheet has been used typically for parts requiring good strength, but usage is not limited to such application.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE ARP4754A

SAE ARP4754A

Guidelines for Development of Civil Aircraft and Systems..

$41.00 $81.00

SAE AMS3277F

SAE AMS3277F

Sealing Compound, Polythioether Rubber, Fast Curing for Integral Fuel Tanks and General Purpose, Int..

$41.00 $81.00

SAE AMS4049L

SAE AMS4049L

Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T65..

$41.00 $81.00

SAE AMS4078H

SAE AMS4078H

Aluminum Alloy Sheet and Plate 5.6Zn 2.5Mg 1.6Cu 0.23Cr 7075 (-T73 Sheet -T7351 Plate) Solution Heat..

$41.00 $81.00