• SAE AMS4309A

SAE AMS4309A

  • Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened
  • standard by SAE International, 12/04/2013
  • Category: SAE

$81.00 $41.00

This specification has been declared “NONCURRENT” by the Aerospace Materials Division, SAE, as of October, 2003. It is recommended, therefore, that this specification not be specified for new designs. “NONCURRENT” refers to those materials which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division, however, does not recommend these as standard materials for future use in new designs.

This specification covers an aluminum alloy powder metallurgy product in the form of round extrusions up to 3.5 inches (89 mm) in diameter and rectangular and other solid extrusions up to 10 square inches (64.5 cm\u2) in cross-sectional area. The maximum extrusion length is 100 inches (2.5m).

These extrusions have been used typically for parts requiring good strength, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS6019

SAE AS6019

ARC Fault Circuit Breaker (AFCB), Aircraft, Trip-Free 28 VDC..

$41.00 $81.00

SAE J1113/27_201206

SAE J1113/27_201206

Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to ..

$41.00 $81.00

SAE ARP1401B

SAE ARP1401B

Aircraft Fuel System and Component Icing Test..

$41.00 $81.00

SAE AMS1435C

SAE AMS1435C

Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways..

$41.00 $81.00