• SAE AMS4344F

SAE AMS4344F

  • Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, St
  • standard by SAE International, 04/10/2018
  • Category: SAE

$81.00 $41.00

1.1 Form

This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles 0.250 to 2.000 .inches (6.35 to 50.80 mm) in nominal thickness and up to 32 in2 (206 cm2), inclusive, in cross-sectional area (see 8.5).

1.2 Application

These extrusions have been used typically for structural applications requiring a combination of high tensile properties, moderate fatigue strength, stress-corrosion resistance, and good fracture toughness, but usage is not limited to such applications.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1272_201502

SAE J1272_201502

Felling Head Terminology and Nomenclature..

$41.00 $81.00

SAE J1623_201502

SAE J1623_201502

Off-Highway Vehicle Headlamps..

$41.00 $81.00

SAE J2593_201502

SAE J2593_201502

Information Report for the Installation of Fluid Conductors and Connectors..

$41.00 $81.00

SAE J58_201502

SAE J58_201502

Flanged 12-Point Screws..

$41.00 $81.00