• SAE AMS4405C

SAE AMS4405C

  • Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged
  • standard by SAE International, 04/10/2018
  • Category: SAE

$81.00 $41.00

1.1 Form

This specification covers an aluminum alloy procured in the form of sheet 0.078 to 0.197 inch (2.00 to 5.00 mm), inclusive, in nominal thickness, Alclad on both sides (see 8.5).

1.2 Application

These products have been used typically for formed structural parts requiring good formability in T4 temper and ability to develop improved resistance to fatigue crack growth and high toughness with moderate strength when aged to T62 temper, but usage is not limited to such applications.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5903B

SAE AMS5903B

Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, ..

$41.00 $81.00

SAE AMS5904B

SAE AMS5904B

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi ..

$41.00 $81.00

SAE AMS5905B

SAE AMS5905B

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi ..

$41.00 $81.00

SAE AMS5906B

SAE AMS5906B

Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi..

$41.00 $81.00