• SAE AMS4415A

SAE AMS4415A

  • Aluminum Alloy Extrusions 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straight
  • standard by SAE International, 05/08/2015
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles (shapes) and tubing.

These extrusions have been used typically for structural applications requiring a combination of high tensile and compressive strength and good corrosions resistance, but usage is not limited to such applications.

Certain processing procedures may cause this product to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5812G

SAE AMS5812G

Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Induction Melt..

$41.00 $81.00

SAE AMS2759/3F

SAE AMS2759/3F

Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts..

$41.00 $81.00

SAE AMS3092A

SAE AMS3092A

Release Agent, for Use During Form-In-Place Gasket Preparation..

$41.00 $81.00

SAE AMS3265E

SAE AMS3265E

Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Int..

$41.00 $81.00