• SAE AMS4599

SAE AMS4599

  • Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T85
  • standard by SAE International, 07/08/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate.

These products have been used typically for parts requiring high strength up to 500 øF (260 øC), but usage is not limited to such applications. Product may be welded in the specified condition but properties are improved by reheat treatment after welding. Reheat treatment after welding, however, may reduce resistance to stress-corrosion cracking. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2401J

SAE AMS2401J

Plating, Cadmium Low Hydrogen Content Deposit..

$41.00 $81.00

SAE AMS5804H

SAE AMS5804H

Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V..

$41.00 $81.00

SAE J1199_201302

SAE J1199_201302

Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners (Stabilized: Feb..

$41.00 $81.00

SAE J442_201302

SAE J442_201302

Test Strip, Holder, and Gage for Shot Peening..

$41.00 $81.00