• SAE AMS4601

SAE AMS4601

  • Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (
  • standard by SAE International, 07/22/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aluminum alloy in the form of sheet and plate.

This product form has been used typically for structural parts requiring high strength up to 500 \mDF (260 \mCD)after proper precipitation heat treatment and which may require forming or welding during fabrication, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AIR6064

SAE AIR6064

Reverse Thrust..

$41.00 $81.00

SAE AMS2431D

SAE AMS2431D

Peening Media General Requirements..

$41.00 $81.00

SAE AMS4078K

SAE AMS4078K

Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T73 Sheet, -T7351 Plate) Solut..

$41.00 $81.00

SAE AMS6387C

SAE AMS6387C

Steel, Carbon, Laminated Sheet, Surface Bonded (Stabilized: May 2018)..

$41.00 $81.00